Step 1 : Insert 2
Sealing Wax Sticks into a low-temperature full size glue gun. You will need one stick to push out the other.
Step 2 : Heat up the glue gun with the wax inserted for about 3 minutes.
Step 3 : Pull trigger to dispense hot
Sealing Wax. 1 pull should suffice for a 25mm
Wax Seal stamp and 1.5 pulls for a 30mm wax seal stamp.
Step 4 : Make sure the wax seal stamp is facing in the correct direction. Place the wax seal stamp evenly (avoid tilting) on top of the hot wax. Let go and let the stamp sink and settle into the sealing wax.
Step 5: Once the seal edge has formed, press down carefully to set the stamp and stop any sliding movements.
Step 6: Wait for the sealing wax to harden and cool completely.
Step 7: Gently peel the stamp off the sealing wax. Admire.
*If you find the wax seal stamp stuck to the sealing wax, let it rest until the sealing wax has cooled. You should then be able to easily release your stamp from the sealing wax.
